Today is February 06, 2012. Do you know what your lap times are?
S2000 Differential and Transmission cooler install
Day 8 - Build up continues on the S2000.
Placement determined, marked and ready to cut.
Cut made to allow low pressure area in vehicle wake to improve air flow over the coolers .
Rear bumper outlet marked and ready to cut.
Cut made; lightweight custom bumper beam that will minimize obstruction to follow.
Fluidyne twin cooler setup with shroud and SPAL fan; one cooler for the differential and one for the transmission.
Cooler/fan assembly installed.
Ducting to seal the cooler exit to the bumper cover will increase efficiency; coming soon.
Part 1 of the install is complete.
WEBSITES:
Related Article: S2000 Sequential Gearbox Installation
Project Cars
- G35 I/H/E Bolt-on's
- Posted: Mar 02, 2010
- Project C6 Corvette
- Posted: Nov 02, 2009
| Powered by 
By looisbrown on December 22nd 2010
Great!Thank you for sharing. Wholesale Electronic Cigarette
By looisbrown on December 22nd 2010
I just love your blog.Keep on posting. Cell Phones wholesale electronic cigarettes